Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 65210820
Linear drive for ventilating roof flaps and skylights, skylight domes and continuous rooflights. M3 runs on 230 V mains voltage and therefore does not require a ballast.
Benefits/Features:
- Compact drive in rectangular aluminium profile without interfering attachments
- Tight closing without limit switch adjustment with integrated electronic load cutoff, therefore always tight closing of window flaps, no limit switch adjustment required
- Dust-tight and splashproof (protection category IP 54)
- Non-corrosive aluminium housing and thrust tube
- Potential-free contact for “not closed” message (contact closes when leaving
closed position)
Material:
- Housing: Rectangular aluminium profile
- End caps: Grey plastic
- Colour: EV1/anodised silver or RAL on request
Technical specifications:
Rated voltage: 230 V AC/50 Hz (-15% /+10%)
Rated current: Approx. 0.2 A
Cutoff: Integrated electronic load cutoff
Protection class: II
Stroke length: 82, 300, 500 and 750 mm
Pressing force: Max. 500 N
Tractive force: Max. 250 N
Locking force: 2000 N
Running speed: Approx. 10 mm/s
Duty cycle: DC 30 (10 min.)
Service life: > 10,000 cycles
Dimensions: (L x H x D) (Stroke + approx. 133 mm) x 82.5 mm x 41 mm
Connecting cable 5 x 0.75 mm², length approx. 1.60 m, grey
Ambient temperature -5 °C to +75 °C
Protection category IP 54
Subject to technical modifications; Illustration is not binding
voltage drive: | 230 V AC |
Application: | Ventilation |
Tractive force [N]: | 250 |
series: | M3 |
Compressive force [N): | 500 |
Stroke [mm]: | 82 |
Approvals and certificates: | TĂĽV type tested |
- Do you have any questions concerning this product?
- Ausschreibungstext vom Linearantrieb M3 (Heinze)
- Ausschreibungstext vom Linearantrieb M3 (STG-Beikirch)
- STG-Beikirch - WIR sind Building Automation
- Bedienungsanleitung M3
- Zeichnung M3
- Datenblatt
- Further products by Kingspan Light + Air | STG-Beikirch
Was ist der Unterschied zwischen Synchronisation und Tandembetrieb?
Bei der Synchronisation wird ein Gleichlauf gewährleistet. Sollte ein Antrieb ausfallen, stoppt der andere sofort automatisch.
Bei der Tandemsteuerung laufen die Antriebe nicht synchron. Es wird jedoch - wie bei der Synchronisation - bei Ausfall eines Antriebes der andere gestoppt. Durch Nachlaufzeiten werden mögliche unterschiedlichen Laufzeiten kompensiert.
Besteht die Möglichkeit, bei STG-Beikirch Antrieben den Hub nachträglich zu verkürzen?
Ja, diese Möglichkeit besteht. Bauartbedingt entweder durch Softwarekonfiguration oder durch mechanische Hubbegrenzung. Die mechanische Hubbegrenzung ist ausschließlich werkseitig möglich.
Besteht die Möglichkeit STG-Beikirch Antriebe mit Meldekontakten auszurüsten?
Ja, das ist möglich. Je nach Bauart auf unterschiedliche Weise.