No results were found for the filter!
Adjusting ring for stroke reduction SR90-A. For... For Linaer drives M9 (up to 650 N) For precise determination of the stroke path (at the mounting location), e.g. for scissor fittings, louvre windows, venetian blinds. Material: aluminium, silver anodised (EV1) Max. permissible force: 650 N
€31.00 *
Base bolt K9/L For M9 Features: For installation with FB9/C hinge bracket, e.g. for louvre designs with linear drives and “eye-eye” fastening Note: Option, mounted on the drive, cannot be retrofitted. Please order together with the drive.
€15.00 *
Position display PA9 For Linaer drives M9 and M1. Magnetically operated contact. In cable duct, incl. switching magnet Any mounting point possible over the entire stroke range of the actuator Several PA9s possible Note: Mounted on the actuator as an option,...
€152.50 *
Sliding bottom-hung bracket K27/B/XL For M2 and M3 Features: Height-adjustable bracket for mounting the narrow side of the drive onto window frames, skylight domes, etc. Installation in the bottom clamp guide Material: Galvanised steel, aluminium, stainless steel Max....
€44.50 *
sliding bottom-hung bracket K26/B/XL For M2 and M3 Features: For mounting the narrow side of the drive onto window frames, skylight domes, etc. Installation in the bottom clamp guide Material: Aluminium, stainless steel Max. permissible force: 1000 N
€59.00 *
Sliding bottom-hung bracket K26/B For M2 and M3 Features: For mounting the narrow side of the drive onto window frames, skylight domes, etc. Installation in the bottom clamp guide Material: Aluminium, stainless steel Max. permissible force: 650 N
€49.00 *
Sliding bottom-hung bracket K27/B For M2 and M3 Features: Height-adjustable bracket for mounting the narrow side of the drive onto window frames, skylight domes, etc. Preferably used on slanted skylight dome bases Installation in the bottom clamp guide Material:...
€39.50 *
Clamping frame bracket K28/B1 For M2 Features: For universal application Complete with two special clamping screws for the lateral clamp guides Specially large contact surface for mounting on the frame Material: Galvanised steel Max. permissible force: 500 N Subject...
€29.50 *
Clamping frame bracket K9/C For M9 Features: Mounting bracket with clamping ring, suitable for universal installation Specially suited for wide-spaced installation on windows and skylight domes Material: Bracket: Steel, Clamping ring: Die-cast aluminium Max....
€44.50 *
Clamping frame bracket K9/O For M9 and M1 Features: The mounting bracket and clamping ring can be slid virtually over the entire drive and is suitable for all widespread profile systems for roof and façade windows Material: Die-cast aluminium Max. permissible...
€45.50 *
Clamping frame bracket K28/B2 For M3 Features: For universal application Complete with two special clamping screws for the lateral clamp guides Specially large contact surface for mounting on the frame Material: Galvanised steel Max. permissible force: 650 N Subject...
€29.50 *
Hinge bracket FB9/H For M2, M3, M6, M7, M9 Features: Like FB9/A but with releasable lateral pin for ventilation systems Material: Galvanised steel Locking pin: 6 mm diameter Eyebolt drill hole: 6.2 mm diameter Max. permissible force: 1000 N Subject to...
€30.00 *
Viewed